: HB 7-SIM2

- High brightness single-chip DLP®-based projector (1920x1080 pixels)
- DUAL LAMP: 2 x 350W
- High Brightness: up to 7,000 Ansi Lumens
- Contrast ratio: up to 8,000:1
- Choice of 3 Lenses: M1/M2/M3
- Full Remote Monitoring & Software Upgrade
- Calibration Probe
Large Venue and graphics resolution projector
Engineered for the most demanding installations, HB7-SIM2 brings a balanced approach to high brightness projection, with a quality of picture that rivals that of the best projectors in its category. Designed to be used with large screen sizes or in brightly-lit light room conditions, where high light output is a necessity, HB 7-SIM2’s optical elements maximize light output (7,000 Ansi Lumens) from its dual high power UHP lamps (2x 350W). This is a star performer that has the power and clarity to satisfy the most demanding viewer and the ability to deliver bright, rich images in real-world lighting conditions
HB 7-SIM2 features a Calibration probe interfaced with the projector’s built-in processing electronics that allows (through refined feedback algorithms) a real time reaction to the environmental conditions. HB 7-SIM2 advanced connectivity: Full Monitoring and Software Upgrade - through a dedicated IP address and a port, service centers can connect with the projector, which will in-turn communicate back a parameter list (i.e. Serial Number, Firmware version, lamp hours used, selected input and resolution, image settings etc.). The service center will have the capability to evaluate a reported issue with the projector and make the necessary adjustments (where possible) to rectify the issue - remotely. HB 7-SIM2 also utilizes full 10 Bit video processing, with high definition scaling and de-interlacing capabilities, to create the highest video images quality from all sources (including 3D). HB 7-SIM22 comes with focus and lens shift memory feature. HB 7-SIM2 features PureMovie, PureAction, and PureAction 3D (*) modes - each optimized for the various demands of computer, movie, sport and 3D viewing – and SIM2’s Live Colors Calibration 2 software that enables complete adjustment of the primary, secondary and white point color coordinates of the projector.
LIGHT ENGINE – GLASS LENS
DLP® Type | 1 Chip 0,65” 1080p DC3 |
Resolution | 1.920x1.080 Native |
3D Features | Actice 3D |
Brightness(2) | up to 7,000 ANSI Lumens |
Contrast ratio | up to 8,000:1 |
Special features | SIM2 Dynamic Black technology; |
Perfect Fit technology(3); | |
PureAction 2D/3D for fast action materials, | |
PureMovie 2D | |
Lamp power | 2 x 350W Lamp |
Lamp life expectancy(4) | 2.000 hours typical in standard power mode; 3,000 hours in ECO mode |
Brightness | Shine color wheel 6.000 ANSI lm, Native White, 2D |
Colors color wheel: 4.500 ANSI lm, Native White, 2D | |
Lamp Power | 2x350W |
Contrast ratio | >6.000:1 "full on full off" |
INSTALLATION
Lenses throw ratio | |
M1: 1,21 – 1,45:1 Motorized zoom and focus | |
M2: 1,45 – 1,93:1 Motorized zoom and focus | |
M3: 1,93 – 3,67:1 Motorized zoom and focus | |
Lens shift | Vertical motorized +60% -60% |
Horizontal motorized +/- 10% | |
Keystone | Digital Adjustment |
Picture size | 30-500 inches diagonal |
Aspect ratio | 4:3, 16:9 Anamorphic, LetterBox, panoramic, pixel to pixel, 3 custom-user adjustments |
ELECTRONICS AND CONNECTIVITY
Horizontal & vertical scan freq. | 15-120kHz/48-100Hz, 24Hz@1080p |
SDTV | PAL (B,G,H,I,M,N,60); SECAM; NTSC autom. selected |
HDTV | 480p, 720p 50/60, 1080i 50/60, 1080p 24/50/60 + 576p |
PC graphic standard | VGA, SVGA, XGA, SXGA, UXGA, WUXGA 10 bit Full Channel Signal Board Video Processing |
INPUTS/OUTPUTS
Analog | 1 x Composite Video (RCA) |
1 x Graphic RGBHV (VGA-UXGA) (D-Sub 15 pin) | |
1 x Component - Analog YPbPr/RGBs/RGBHV | |
Digital | 2 x HDMI™-HDCP (1.4 with DeepColor) |
Service and control | 1 x USB connector Remote Control Port (Host Mode Only) |
1 x RS232 (D-Sub 9 pin) | |
1 x LAN (RJ45 Ethernet Port) | |
1 x 3D Sync Out | |
3 x 12V 100mA jack | |
1 x IR Receiver for Remote Control |
GENERAL SPECIFICATIONS
Mains voltage range | 100-240Vac ±10% (48/62Hz) |
Power consumption | maximum dual lamp operation: 900W; maximum single lamp operation: 460W; maximum when lamp cooling: 33W; stand-by: less than 1W |
Weight | 28 Kg (62 lbs) approx. |
Dimensions (WxHxD) | 464x241x564 mm (18,3” x 9,5” x 22,2”) |
Software control | upgradable via RS232, serial interface or USB |
ACCESSORIES
Supplied | Installation and User Manual AC power cords (2m - 6.6 ft) |
Backlit remote control and batteries | |
Live Colors Calibration software 2.0 | |
High Precision Probe | |
RS232 Adapter Cable; | |
USB Wi-Fi adapter | |
Optional | SIM2 VISUS Active Glasses (1) |
Emitter | |
Projector ceiling bracket | |
Anamorphic lens systems (fixed or motorized) |