Cubes: RPU 301HBD

RPU 301HB
  • 1-Chip DLP® digital technology rear-projector
  • SXGA+ (1400x1050) native resolution
  • New LVDS Chip2 - 12° for an excellent contrast ratio (2000:1)
  • Aspect Ratio 4:3
  • Excellent white uniformity.
  • Dual lamp system.
  • Wide band input board (170 MHz).
  • New CCTRL3.
  • New DVI Input.
  • New robust RS 485 control, plus RS232 control. USB as option.

The SIM2 DLP® Rear-projection engines for Data and Video Input signals deliver the highest contrast, best image quality, operational reliability, serviceability to display your image 24/7/365.

BEST IMAGE QUALITY

The RPU 301HB incorporates innovative, DLP® Single Chip technology for a superb image quality. The new LVDS - 12° Chip enables the RPU 301HB to deliver both an impressive and superb contrast, resulting in a perfect image quality. It delivers outstanding color and brightness uniformity.

ALL UNDER CONTROL

With SIM2 Software, you can easily set the rear-projection parameters and control your videowall. The SIM2 EasyWall new software allows you to set all the parameters (contrast, brightness, colorimetry etc.) and construct a simple configuration.

RELIABILITY

The inherent durability of the DMD ensures low power dissipation, long lasting operations and “burn-in” effect free display at any time. The dual lamp system guarantees the total efficiency of your Videowall and the lamp change is automatic, made without the intervention of the operator. The second lamp brings redundancy to the system and guarantees an image at all times, in fact the 'redundant' lamp starts up after lamp failure of the 'master' lamp in about 30 seconds. The RPU 301HB is designed to reliably work in 24h/7/365 days facilities.

EASY INSTALLATION

The rear-projection engine is packaged in one single carton box. The gross weight is around 13,5 Kg. The low net weight allows you to manage and install it very easy.

MAINTENANCE

Easy operations allow technicians, installers and Engineers to access the inside of the engine for lamp and electronics and optics replacement, minimizing downtime for service and maintenance.

Projection system

Technology DLP® 1 chip DMD LVDS Chip – DDR 12°
DMD Panel Resolution SXGA+ (1400x1050)
Aspect Ratio (W:H) 4:3
Optical lens WA 0,737:1
Brightness - RPU301: ~700 ANSI lm (white field @ 8000K)
RPU301HB: ~900 ANSI lm (100% white field @ 8000°K)
Uniformity >90% ANSI measurement
Contrast Ratio 2000:1 "full on/full off"
Number of colors no. 16,777,216 colors
Colour Temperature 6.500°K-12.000°K adjustable, 3500K reachable
Lamp 150W (dimmable to 132W)
Average life 150W 6.000 hrs* (x2), 10.000 hrs in a 132W configuration (50% survival @50% integral lm maintenance)

Electronics

Horizontal Frequency 15KHz-110 KHz
Vertical Frequency 48Hz-120 Hz
Analog Bandwidth 170 MHz @ -3dB for graphic signals;
8 MHz @ -2dB for video signals
Graphic Standards from VGA (640x480) to UXGA (1600x1200) with internal scaling
Video Standard automatic decoding PAL, NTSC, SECAM
Internal Magnification from 0,75x to 16x
Graphic Inputs 1 x RGB+HV (or YPrPb or 1 CVBS) on 75 ohm BNC connectors
1 x RGB+HV on HD15 connector
Video Inputs 1 x CVBS + S (in/out) on 75 ohm BNC connectors
1 x S-VIDEO (in/out) on miniDIN4 connectors
ATSC HDTV is also supported on BNC or HD15 or DVI connectors

DVI Input / Output

DVI 1.0 specification Single link up to 165MHz Analog RGBHV (or YPrPb) + Digital RGB;
Active Loop Through for the digital link
Control Interface Serial Interface RS232C or RS485 on DB9 in/out connectors or USB (on request) for control from remote PC;
IR remote control handset (on request)

Electrical Data

Main Power Supply 100 Vac - 240 Vac +/- 10%;
Line Frequency 48 - 62 Hz
Power Consumption Max 185 W (160 Kcal/h)
Max Current Absorption @ 120V: 1,5 Arms @ 230V: 0,8 Arms
Max Inrush Current 30 A
Fuse T 3.15A H 5x20mm
Mains Loop-Through @ 120 V: max 5 units; @ 230 V: max 10 units

Mechanical Data

Package dimensions (WxHxD) 620x385x423 mm
Engine dimensions 476x277x239 mm (WxHxD)
Gross Weight 13,5 Kg with all accessories

Environmental Data

Exhaust Air 48°C (@ 35°C environment)
Ambient Temperature Operating from 0° to +35°C
Storage and Transportation from -10°C to +55°
Humidity from 10% HR to 90% (without condensation)
Max Altitude Operating 4.000 m
Transportation 11.000 m

Installation Position

Standard horizontal (based on the rubber feet);
Vertical (with a vertical projection lens axis).
Allowable tilt around the lamp axis: from 0° to 360
tilt of the lamp axis from -10° to 10°

Safety and regulatory data

Drop Test in compliance with UNI-EN 22247 and 22248
Safety in compliance with EN 60950, UL60950
EMC emission in compliance with EN 55022, EN61000-3-2/3
EMC immunity in compliance with EN 55024, EN61000-4-2/3/4/5/6/8/11, ENV 502047
UNIT: ASPECT RATIO:
in cm 16:9
DIAGONAL

WIDTH

HEIGHT

DISTANCE