: HB 7-SIM2

  • High brightness single-chip DLP®-based projector (1920x1080 pixels)
  • DUAL LAMP: 2 x 350W
  • High Brightness: up to 7,000 Ansi Lumens
  • Contrast ratio: up to 8,000:1
  • Choice of 3 Lenses: M1/M2/M3
  • Full Remote Monitoring & Software Upgrade
  • Calibration Probe

Large Venue and graphics resolution projector

Engineered for the most demanding installations, HB7-SIM2 brings a balanced approach to high brightness projection, with a quality of picture that rivals that of the best projectors in its category. Designed to be used with large screen sizes or in brightly-lit light room conditions, where high light output is a necessity, HB 7-SIM2’s optical elements maximize light output (7,000 Ansi Lumens) from its dual high power UHP lamps (2x 350W). This is a star performer that has the power and clarity to satisfy the most demanding viewer and the ability to deliver bright, rich images in real-world lighting conditions

HB 7-SIM2 features a Calibration probe interfaced with the projector’s built-in processing electronics that allows (through refined feedback algorithms) a real time reaction to the environmental conditions. HB 7-SIM2 advanced connectivity: Full Monitoring and Software Upgrade - through a dedicated IP address and a port, service centers can connect with the projector, which will in-turn communicate back a parameter list (i.e. Serial Number, Firmware version, lamp hours used, selected input and resolution, image settings etc.). The service center will have the capability to evaluate a reported issue with the projector and make the necessary adjustments (where possible) to rectify the issue - remotely. HB 7-SIM2 also utilizes full 10 Bit video processing, with high definition scaling and de-interlacing capabilities, to create the highest video images quality from all sources (including 3D). HB 7-SIM22 comes with focus and lens shift memory feature. HB 7-SIM2 features PureMovie, PureAction, and PureAction 3D (*) modes - each optimized for the various demands of computer, movie, sport and 3D viewing – and SIM2’s Live Colors Calibration 2 software that enables complete adjustment of the primary, secondary and white point color coordinates of the projector.


DLP® Type 1 Chip 0,65” 1080p DC3
Resolution 1.920x1.080 Native
3D Features Actice 3D
Brightness(2) up to 7,000 ANSI Lumens
Contrast ratio up to 8,000:1
Special features SIM2 Dynamic Black technology;
Perfect Fit technology(3);
PureAction 2D/3D for fast action materials,
PureMovie 2D
Lamp power 2 x 350W Lamp
Lamp life expectancy(4) 2.000 hours typical in standard power mode; 3,000 hours in ECO mode
Brightness Shine color wheel 6.000 ANSI lm, Native White, 2D
Colors color wheel: 4.500 ANSI lm, Native White, 2D
Lamp Power 2x350W
Contrast ratio >6.000:1 "full on full off"


Lenses throw ratio
M1: 1,21 – 1,45:1 Motorized zoom and focus
M2: 1,45 – 1,93:1 Motorized zoom and focus
M3: 1,93 – 3,67:1 Motorized zoom and focus
Lens shift Vertical motorized +60% -60%
Horizontal motorized +/- 10%
Keystone Digital Adjustment
Picture size 30-500 inches diagonal
Aspect ratio 4:3, 16:9 Anamorphic, LetterBox, panoramic, pixel to pixel, 3 custom-user adjustments


Horizontal & vertical scan freq. 15-120kHz/48-100Hz, 24Hz@1080p
SDTV PAL (B,G,H,I,M,N,60); SECAM; NTSC autom. selected
HDTV 480p, 720p 50/60, 1080i 50/60, 1080p 24/50/60 + 576p
PC graphic standard VGA, SVGA, XGA, SXGA, UXGA, WUXGA 10 bit Full Channel Signal Board Video Processing


Analog 1 x Composite Video (RCA)
1 x Graphic RGBHV (VGA-UXGA) (D-Sub 15 pin)
1 x Component - Analog YPbPr/RGBs/RGBHV
Digital 2 x HDMI™-HDCP (1.4 with DeepColor)
Service and control 1 x USB connector Remote Control Port (Host Mode Only)
1 x RS232 (D-Sub 9 pin)
1 x LAN (RJ45 Ethernet Port)
1 x 3D Sync Out
3 x 12V 100mA jack
1 x IR Receiver for Remote Control


Mains voltage range 100-240Vac ±10% (48/62Hz)
Power consumption maximum dual lamp operation: 900W; maximum single lamp operation: 460W; maximum when lamp cooling: 33W; stand-by: less than 1W
Weight 28 Kg (62 lbs) approx.
Dimensions (WxHxD) 464x241x564 mm (18,3” x 9,5” x 22,2”)
Software control upgradable via RS232, serial interface or USB


Supplied Installation and User Manual AC power cords (2m - 6.6 ft)
Backlit remote control and batteries
Live Colors Calibration software 2.0
High Precision Probe
RS232 Adapter Cable;
USB Wi-Fi adapter
Optional SIM2 VISUS Active Glasses (1)
Projector ceiling bracket
Anamorphic lens systems (fixed or motorized)